Wireless Range Extender N300

Wireless Range Extender N300

WL-330 v1 001

View the Installation video ›
 
Back

How do I access the Settings menu of my WL-330 range extender?

How do I access the Settings menu of my WL-330 range extender?

All you need to get to the Settings menu of the WL-330 is a connection between the device you are using to access the Settings menu (PC, laptop) and the WL-330. If you do not have a connection, you must establish one first before you can continue. We recommend using a network cable to connect the devices. 

To access the Settings menu a connection between the WL-330 and a router (or modem router) is not necessarily required. 

 

Accessing the Settings menu

You can only access the Settings menu of the WL-330 through a browser such as Internet Explorer or Safari. In other words, you control your range extender via your PC or laptop.

Complete the following steps to log in to the Settings menu.

 

1. Open your web browser. Enter 192.168.0.234 in the address bar.


Do you get a notification that the page cannot be found? Click here for more information.

 

2. The following pop-up appears.

 Here you should enter admin in both fields (these are the default values). This is also printed on the sticker on the back of your range extender. If you have changed them, obviously you must enter the new values.

 

3. Then click OK.

You will now see the main page of the Settings menu. Here, for instance, you can go to the Basic Settings tab to configure a connection to your router or access point if you have not already done so. 

Done! You finished all the steps!

Back to start ›
Previous step
1 2
Next step

Rate this anwer. This answer is:

Good, it was clear
Not good, it was not clear

More information

See other FAQs ›